Topic
Process parameters
Equipment, technical notes and selection guidance filed under Process parameters.
News
View all
Technical notes under this topic
2026.11.11
2026.11.05
2026.11.02
2026.10.30
2026.10.24
UV Curing Energy Calculation: Conversion between mJ/cm² and mW/cm² and Production Line Matching
UV curing failure is usually not due to insufficient lamp brightness, but incorrect energy delivery.…
Defining Tunnel Oven Temperature Profiles: Selection of Three-Stage, Five-Stage, and Heating Rates
The number of heating zones is not necessarily better when increased. Based on the three stages of s…
How to stabilize dispensing volume at ±1%: Full-chain control from needle, pressure to adhesive viscosity
Dispensing accuracy is a system error, not a single-point error. Analyze the error sources of time-p…
Automotive Exterior Parts UV Curing Production Line: Energy Distribution and Cycle Time Calculation for Three-Lamp Configuration
UV clear coat curing for exterior trim parts such as bumpers, grilles, and mirror housings commonly …
Blind Hole Part Cleaning: Effect Boundaries of Ultrasonic and High-Pressure Spraying
Spray washing for surfaces, ultrasonic washing for internal cavities. Select the process or combinat…
Request
Tell us your process.
Share workpiece material, size, throughput and current line setup. Our engineers reply with a configuration and a realistic lead time.